Standard Duty Square Festoon Systems On The Rowland Company

Search Catalog



	All Categories Standard Duty Square Festoon Systems


All Categories > Crane Control & Electrification > Cable Festoon Systems > Square Bar > Standard Duty Square Festoon Systems


	Standard Duty Square Festoon Systems

	Click on a Product to view details.


		Track for Standard Duty Square Festoon Systems (3)




		Track Joint for Standard Duty Square Festoon Systems (2) Track joint for secure attachment and proper alignment of track sections.




		Track Hanger for Standard Duty Square Festoon Systems (2) Designed to be mounted on angle iron bracket. 5’ spacing. Typical, 2.5’ spacing in storage area. NOTE: Use Drill Fixture for Drilling Holes. Part No. 25726




		End Stop for Standard Duty Square Festoon Systems (2) Designed to be located between end clamp and intermediate trolley.




		Tow Trolley for Standard Duty Square Festoon Systems (2) Load rating 45 lbs. max. One required per system. 4” long body with cut out for Tow Bar.




		Control Trolley Junction Boxes and Terminal Strips (34)




		Cable Trolley for Standard Duty Square Festoon Systems (2) Trolley load rating 45 lbs. max. 4” long body with 2.75” dia. aluminum saddle.




		End Clamp for Standard Duty Square Festoon Systems (2) One required per system at storage end of track.




		Drill Fixture for Standard Duty Square Festoon Systems Used for drilling holes at proper locations for attachment of hangers, end clamps and end stops.




		Push Button Pendants Push Button Pendants are used in conjunction with hard-wired control festoon systems. Conductix offers a complete line of Push Button Pendants and Radio Controls. Ask for Pendant & Radio Catalog to get all the details.




		"Quick Disconnect" Pin Connectors In most industrial environments, Push Button Pendants take a lot of abuse. Eventually, they will need to be replaced. When a pendant station has to be replaced, the biggest concerns are always: Equipment downtime Expense Risk of injury to maintenance personnel CONDUCTIX has the solution to reduce all three of these concerns - the “Quick Disconnect” Pin Connector. Pendants wired with “Quick Disconnect” Pin Connectors can be replaced in as little as 5 to 10 minutes, versus two hours with a hard-wired pendant. A positive latch mechanism keeps the connector plugged in until you’re ready to disconnect the pendant. The quick-disconnect connectors are available in 16 and 24 pin ...

Accessories


	Tow Webbing