The design check for the lift buffers listed in the table has been made according to the hoisting directives 95/16/EG. The permissible load zones are documented for each lift buffer type by the certificate No. An EC design check certificate can be provided for each lift buffer type.
Lifts with lower speed than the maximum nominal speed taken as a basis for the design check, are for the same load zone, when the loads from cabin / working load or counter load are within the values mmax and mmin.
Lifts with lower speed than the maximum nominal speed taken as a basis for the design check, are for the same load zone, when the loads from cabin / working load or counter load are within the values mmax and mmin.
Unit of Measure
Specifications
Maximum Permissible Impact Mass @ 0.4 m/s |
N/A 2744 kg |
Minimum Permissible Impact Mass @ 0.4 m/s |
N/A 203 kg |
Maximum Permissible Impact Mass @ 0.63 m/s |
N/A 2120 kg |
Minimum Permissible Impact Mass @ 0.63 m/s |
N/A 203 kg |
Maximum Permissible Impact Mass @ 1.00m/s |
N/A 1980 kg |
Minimum Permissible Impact Mass @ 1.00m/s |
N/A 203 kg |
Maximum Comp. Length |
N/A 90 mm |
Dimension G |
N/A 1.93 kg |
Dimension d1 |
N/A 140 mm |
Dimension h1 |
N/A 100 mm |
Dimension S |
N/A 10 mm |
| PE1 | N/A 1 pc |
- 1 1)= packing unit = minimum order quantity
