Products Catalog
Request Information
Type DC elements can be used as either pressure actuated clutches or brakes. They are available in single and multiple disc designs.

Pressurizing the cylinder causes the piston to clamp the friction disc assemblies between clamping plates. External springs ensure positive disengagement.

Type DC elements are available in five basic disc sizes with static torque ratings to 2,061,000 lb.in (233.000 N.m). Element sizes are indicated by the number of friction discs and by the disc diameter in inches. For instance, size 225DC has two friction discs 25 inches in diameter.
Unit of Measure

Features

N/A Favorable torque to size ratio.
DC type elements are physically smaller than most other type clutches and brakes with the same torque capacity.

Low inertia friction disc assembly.
Reduces the overall inertia that must be started or stopped.

Optional split friction discs.
Allows removal of friction discs without disturbing other components of drive system in mid-shaft element arrangement.

Long wearing, self lubricating PolyPak* seals.
Eliminates premature twisting failure and requires no external lubrication.

Where Used

N/A

  • Power Presses
  • Tension Brakes
  • Emergency Stop Brakes on Unwind Stands

Specifications

Dimension D1

 N/A 12.00 in305 mm

W4

 N/A 18.00 in457 mm

Dimension D46

 N/A 0.00 in0 mm

Dimension D31

 N/A 1.75 in44 mm

Dimension D44

 N/A 0.25 in6 mm

Dimension H16

 N/A 11.50 in292 mm

H Number

 N/A 4

H Size

 N/A 3/8-16NC-2

Bolt Circle

 N/A 12.25 in311 mm
Dimension J1 N/A 30.630 in778.0 mm
Dimension J12 N/A 24.375 in619.1 mm
Dimension J23 N/A 30.58 in777 mm

Dimension O2

 N/A 1/2-14 NPT

Number of Friction Discs

 N/A 4

Size

 N/A 425DC

Dynamic Torque Rating at 75 psi (5.2 bar)

 N/A 640000 lb·in72260 Nm

Maximum Speed of Disc

 N/A 1400 rpm

Maximum Speed of Element

 N/A 650 rpm

Housing (Inertia)

 N/A 582 lb·ft²24.53 kg·m²

Disc & Gear (Inertia)

 N/A 186 lb·ft²7.84 kg·m²

Disc and Gear (Weight)

 N/A 533 lb242 kg

Housing (Weight)

 N/A 953 lb432 kg

Gear Part Number

 N/A 416477

Minimum Bore

 N/A 6.25 in159 mm

Maximum Bore

 N/A 6.88 in175 mm

Manufacturer

 N/A Eaton-Airflex

Actuation

 N/A Air (DC)

Note

N/A Basic part number only. Gear not included.
Some high torque applications of three and four disc elements require additional support on the cylinder side of the unit. Contact your local Airflex representative for more details.

  • 1 Tolerance +0.000/-0.003 in (+0.00/-0.08 mm)
  • 2 Tolerance +0.003/-0.000 in (+0.08/-0.00 mm)
  • 3 Maximum diameter of "as cast" surfaces.