|
|
|
|
Item # 6-609-005-003-0000, Model HSD Mesur-Fil Fluid Coupling
|
|
|
|
|
|
Hydro-sheave couplings are mounted to the motor shaft end and provide minimal overhung loads for parallel (belt-driven) shaft applications. The smaller sizes (7-12.4) are installed very quickly and easily utilizing a slotted collet in which no drilling or tapping is required. The slotted collet is finished bored to fit standard NEMA B motor shaft dimensions. The larger sizes (15-24) are installed with a center locating bolt that does require drilling and tapping to ensure proper mounting. The Model HSD Fluid Coupling consists of a basic fluid coupling, input and output group, and a standard customer supplied QD type sheave. The sheave is mount ed on a coupling that has been installed on the end of a driveshaft.
|
|
|
|
|
|
|
|
|
Dimension D
up to 2 inch: +0.001/-0.000
from 2 to 4 inch: +0.0015/-0.000
Dimension W
up to 0.500 inch: +0.002/-0.000
from 0.625 to 1 inch: +0.003/-0.000
|
|
|
|
Do not use Eaton QD sheaves.
Bolt pattern is not the same.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
