Short and Super Short Cardan Shafts On The Rowland Company

COMPANY HEADER

No machine element other than a cardan shaft allows power transmission of torque between spacially offset driving and driven shafts whose position can be changed during operation.

Spatial angular motion and changes of axial length are ensured by advanced constructional elements.

Thus, cardan shafts have become an indispensable transmission component in automotive engineering and industry.

1 - 25 of 30 | Results Per Page | View | Unit of Measure

1 2

Request Information Compare Items

Item #	Design Type	Maximum Angle (ß)	Slip (La)	Alternating Torque	Dimension d1

15-43	N/A Normal Angle Design	N/A 25 º	N/A 20 mm	N/A 100 Nm	N/A 65 mm
30-43	N/A Normal Angle Design	N/A 20 º	N/A 15 mm	N/A 320 Nm	N/A 90 mm
30-44	N/A Wide Angle Design	N/A 30 º	N/A 15 mm	N/A 320 Nm	N/A 90 mm
43-43	N/A Normal Angle Design	N/A 20 º	N/A 25 mm	N/A 1000 Nm	N/A 100 mm
43-44	N/A Wide Angle Design	N/A 30 º	N/A 25 mm	N/A 1000 Nm	N/A 100 mm
53-43	N/A Normal Angle Design	N/A 20 º	N/A 30 mm	N/A 1300 Nm	N/A 120 mm
53-44	N/A Wide Angle Design	N/A 35 º	N/A 45 mm	N/A 1300 Nm	N/A 120 mm
63-43	N/A Normal Angle Design	N/A 20 º	N/A 35 mm	N/A 1700 Nm	N/A 150 mm
63-44	N/A Wide Angle Design	N/A 35 º	N/A 35 mm	N/A 1700 Nm	N/A 150 mm
58-44	N/A Wide Angle Design	N/A 30 º	N/A 20 mm	N/A 2500 Nm	N/A 150 mm
68-43	N/A Normal Angle Design	N/A 24 º	N/A 30 mm	N/A 4000 Nm	N/A 180 mm
68-44	N/A Wide Angle Design	N/A 35 º	N/A 30 mm	N/A 4000 Nm	N/A 180 mm
70-43	N/A Normal Angle Design	N/A 25 º	N/A 50 mm	N/A 5100 Nm	N/A 180 mm
72-43	N/A Normal Angle Design	N/A 20 º	N/A 40 mm	N/A 5100 Nm	N/A 180 mm
72-44	N/A Wide Angle Design	N/A 24 º	N/A 40 mm	N/A 5100 Nm	N/A 180 mm
73-43	N/A Normal Angle Design	N/A 20 º	N/A 40 mm	N/A 7300 Nm	N/A 180 mm
73-44	N/A Wide Angle Design	N/A 24 º	N/A 40 mm	N/A 7300 Nm	N/A 180 mm
77-43	N/A Normal Angle Design	N/A 25 º	N/A 60 mm	N/A 11000 Nm	N/A 180 mm
79-43	N/A Normal Angle Design	N/A 22 º	N/A 95 mm	N/A	N/A 200 mm
80-43	N/A Normal Angle Design	N/A 24 º	N/A 30 mm	N/A 13000 Nm	N/A 225 mm
83-43	N/A Normal Angle Design	N/A 20 º	N/A 60 mm	N/A 18000 Nm	N/A 250 mm
84-43	N/A Normal Angle Design	N/A 20 º	N/A 60 mm	N/A 23000 Nm	N/A 285 mm
63-4496	N/A Reduced Deflection Angle Design	N/A 20 º	N/A 30 mm	N/A 1700 Nm	N/A 150 mm
73-4496	N/A Reduced Deflection Angle Design	N/A 10 º	N/A 15 mm	N/A 6500 Nm	N/A 180 mm
73-4496	N/A Reduced Deflection Angle Design	N/A 5 º	N/A 15 mm	N/A 6500 Nm	N/A 180 mm

1 - 25 of 30 | Results Per Page | View | Unit of Measure

1 2

Item #

Design Type

Maximum Angle (ß)

Slip (La)

Alternating Torque

Dimension d1