The Rowland Company
The Rowland Company
4900 North 20th St.
Philadelphia, PA 19144
Toll Free: (800) 925-8824
Phone: (215) 455-4900
Fax: (215) 455-8888
Email: rowland@rowland2.com
Print Back
  • Copper disc design for high heat dissipation
  • Accurate control
The Wichita Kopper Kool airtube disc Clutches and Brakes are liquid cooled and consist of a series of alternating discs connecting an inner drive member to an outer drive member.

Engagement is achieved by pneumatic expansion of the airtube. This air-operated clutch contains copper discs for excellent heat dissipation and provides an accurately controlled continuous slip action for constant web tensioning. Tension levels are in direct proportion to air pressure applied.
Unit of Measure

Design Features

N/A

  • New friction material lasts longer with less wear on mating copper.
  • Copper alloy wear plates increase heat transfer.
  • Hub spline provides perfect alignment of rotating discs.
  • External air & water connections.
  • Release springs ensure complete disengagement.
  • High strength reinforced neoprene air-tube offers long service life.
  • Optional long stroke air tube available on 18" or 24" size units to increase life and standard maintenance intervals.
  • High thermal capacity.

Specifications

Assembly Number

 N/A 7-314-110-115-0
Dynamic Torque Rating (80 psi/5.5 bar)1 N/A 16800 lb.in 1864 Nm
Dynamic Torque Rating (100 psi/7 bar)2 N/A 21000 lb.in 2373 Nm

Heat Capacity for Series Water Hosing

 N/A 50 hp37 kW

Heat Capacity for Parallel Water Hosing

 N/A 75 hp56 kW

Maximum Bore Size

 N/A 4.38 in111 mm

Parallel Water Flow 0 % Ethylene Glycol

 N/A 7.5 gpm28 lpm

Parallel Water Flow 30 % Ethylene Glycol

 N/A 9.8 gpm37 lpm

Parallel Water Flow 50 % Ethylene Glycol

 N/A 12 gpm45 lpm

Total Brake (Weight)

 N/A 221 lb100.2 kg

Disc & Gear (Weight)

 N/A 40 lb18 kg

Disc & Gear (Inertia)

 N/A 5 lb·ft²0.21 kg·m²

Pressure Drop Series Flow with 0 % Ethylene Glycol

 N/A 4 psi0.14 bar

Pressure Drop Series Flow with 30 % Ethylene Glycol

 N/A 8 psi0.55 bar

Pressure Drop Series Flow with 50 % Ethylene Glycol

 N/A 12 psi0.83 bar

Maximum Lining Wear

 N/A 0.5 in1.3 cm60 in³1.0 dm³

Water Volume

 N/A 20 in³0.33 dm³

Pilot Diameter A

 N/A 18.747/18.750 in476.17/476.25 mm

Bolt Hole Circle Diameter B

 N/A 17.500 in444.50 mm

Pilot Diameter C

 N/A 14.375/14.378 in365.13/365.20 mm

Dimension D

 N/A 17.50 in444.5 mm

Dimension F

 N/A 3.25 in82.6 mm

Dimension G

 N/A 1.06 in26.9 mm

Dimension H

 N/A 7.00 in177.8 mm

Dimension J

 N/A 0.25 in6.4 mm

Number of Bolt Holes

 N/A 6

Bolt Hole Size L

 N/A 21/32 in16.7 mm

Dimension M

 N/A 7.38 in187.5 mm

Dimension N

 N/A 6.50 in165.1 mm

Dimension Q

 N/A 1.50 in38.1 mm

Number of Inlet Ports - Thread Size

 N/A 2- 1/2 NPT

Dimension T

 N/A 7.00 in177.8 mm

Minimum U

 N/A 1.38 in35.1 mm

Maximum U

 N/A 4.38 in111.3 mm
Number of Coolant Inlets - Thread Size3 N/A 2 - 1/2 NPT

Manufacturer

 N/A Wichita Clutch

Actuation

 N/A Air Applied

Note

N/A Maximum water jacket inlet pressure is 60 PSI. Brakes with as great as 50 % higher torque capacity is available upon request.

For mounting, use socket head capscrews conforming to the ASTM-574-97a.

  • 1 Static torque will vary with temperature. Maximum air pressure is 100 PSI / 7 BAR. Minimum recommended air pressure is 3 PSI.
  • 2 Static torque will vary with temperature. Maximum air pressure is 100 PSI / 7 BAR. Minimum recommended air pressure is 3 PSI.
  • 3 Number of inlets and outlets are equivalent.
    (Consult factory for drawing before final layout.)