Products Catalog
Two dual flanged elements can be bolted together to form a dual element having twice the torque capacity of a single element. Dual elements can be furnished in sizes 12CB350 through 45CB525.
Unit of Measure

Specifications

Size

 14CB400
Torque Rating (75 psi/5.5 bar)1 39400 lb·in4450 Nm
Maximum Speed2 1800 rpm

Centrifugal Loss Constant Cs

 1.04 E-06 bar/rpm2 15 E-06 psi/rpm2

Inertia

 42 lb·ft²1.76 kg·m²

Weight

 75 lb34 kg

Friction Area

 340 in²2193 cm²

New Friction Lining Thickness

 0.20 in5 mm

Worn Friction Lining Thickness

 0.06 in2 mm
Air Tube Cavity3 140 in³2.30 dm³

Minimum Drum Diameter

 13.9 in353 mm

Dimension D2

 11.13 in283 mm

Dimension D25

 0.19 in5 mm
Dimension G4 19.625 in498.5 mm

Dimension H2

 18.875 in479.4 mm

Dimension H6

 14.13 in359 mm

Dimension H7

 18.88 in479 mm

Number of Mounting Holes

 16

Bolt Hole Size L

 0.375 in10 mm

Dimension O3

 0.31 in8 mm

Air Inlet Thread

 3/8-18

Angle Q

 11.250 º

Dimension V

 0.69 in17 mm

Number of Friction Shoes

 28

Friction Shoe Width (W)

 9.75 in248 mm

Note

N/A Refers to basic part number only. When ordering, the number of air inlets and type of connection must be specified.

  • 1 Dynamic torque shown, static torque approximately 25% greater. Torque in each application is dependent upon air pressure and speed.
  • 2 Maximum rpm is dependent upon operating conditions and varies for each application. Consult factory for applications exceeding these speeds.
  • 3 Drum contact with worn shoes.
  • 4 Tolerance for sizes:
    12 thru 24, 28 and 32
    +0.000/-0.005 in (+0.00/-0.13 mm)
    26 and 30
    +0.000/-0.008 in (+0.00/-0.20 mm)
    36 thru 45
    +0.000/-0.010 in (+0.00/-0.25 mm)