Products Catalog
Type DC elements can be used as either pressure actuated clutches or brakes. They are available in single and multiple disc designs.

Pressurizing the cylinder causes the piston to clamp the friction disc assemblies between clamping plates. External springs ensure positive disengagement.

Type DC elements are available in five basic disc sizes with static torque ratings to 2,061,000 lb.in (233.000 N.m). Element sizes are indicated by the number of friction discs and by the disc diameter in inches.more
Unit of Measure

Features

N/A Favorable torque to size ratio.
DC type elements are physically smaller than most other type clutches and brakes with the same torque capacity.

Low inertia friction disc assembly.
Reduces the overall inertia that must be started or stopped.

Optional split friction discs.
Allows removal of friction discs without disturbing other components of drive system in mid-shaft element arrangement.

Long wearing, self lubricating PolyPak* seals.
Eliminates premature twisting failure and requires no external lubrication.

Where Used

N/A

  • Power Presses
  • Tension Brakes
  • Emergency Stop Brakes on Unwind Stands

Specifications

Dimension D1

 13.00 in330 mm

W4

 19.50 in495 mm

Dimension D46

 0.00 in0 mm

Dimension D31

 2.45 in62 mm

Dimension D44

 0.25 in6 mm

Dimension H16

 16.50 in419 mm

H Number

 4

H Size

 1/2-13NC-2

Bolt Circle

 17.50 in445 mm
Dimension J1 44.750 in1136.7 mm
Dimension J12 36.375 in923.9 mm
Dimension J23 44.86 in1139 mm

Dimension O2

 3/4-14 NPT

Number of Friction Discs

 3

Size

 338DC

Dynamic Torque Rating at 75 psi (5.2 bar)

 1680000 lb·in189670 Nm

Maximum Speed of Disc

 950 rpm

Maximum Speed of Element

 450 rpm

Housing (Inertia)

 2247 lb·ft²94.69 kg·m²

Disc & Gear (Inertia)

 837 lb·ft²35.27 kg·m²

Disc and Gear (Weight)

 1087 lb493 kg

Housing (Weight)

 1734 lb786 kg

Gear Part Number

 416241

Minimum Bore

 9.25 in235 mm

Maximum Bore

 9.75 in248 mm

Manufacturer

 Eaton-Airflex

Actuation

 Air (DC)

Note

N/A Basic part number only. Gear not included.
Some high torque applications of three and four disc elements require additional support on the cylinder side of the unit. Contact your local Airflex representative for more details.

  • 1 Tolerance +0.000/-0.003 in (+0.00/-0.08 mm)
  • 2 Tolerance +0.003/-0.000 in (+0.08/-0.00 mm)
  • 3 Maximum diameter of "as cast" surfaces.