The Rowland Company
The Rowland Company
4900 North 20th St.
Philadelphia, PA 19144
Toll Free: (800) 925-8824
Phone: (215) 455-4900
Fax: (215) 455-8888
Email: rowland@rowland2.com
Print Back
Section B
Form CB-402
Unit of Measure

Specifications

Size

 24CB500
Torque Rating (75 psi/5.5 bar)1 75000 lb·in8480 Nm
Maximum Speed2 1200 rpm

Centrifugal Loss Constant Cs

 2.07 E-06 bar/rpm2 30 E-06 psi/rpm2

Inertia

 142 lb·ft²5.96 kg·m²

Weight

 102 lb46 kg

Friction Area

 338 in²2180 cm²

New Friction Lining Thickness

 0.26 in7 mm

Worn Friction Lining Thickness

 0.06 in2 mm
Air Tube Cavity3 200 in³3.28 dm³

Minimum Drum Diameter

 23.87 in606 mm

Dimension D2

 6.63 in168 mm

Dimension D24

 2.50 in64 mm

Dimension D25

 0.19 in5 mm
Dimension G4 31.500 in800.1 mm

Dimension G1

 28.75 in730 mm

Dimension H2

 30.375 in771.5 mm

Dimension H6

 24.19 in614 mm

Dimension H7

 30.38 in772 mm

Number of Mounting Holes

 16

Bolt Hole Size L

 0.500 in13 mm

Dimension O3

 0.38 in10 mm

Air Inlet Thread

 3/8-18

Angle Q

 11.250 º

Dimension V

 0.81 in21 mm

Number of Friction Shoes

 14

Friction Shoe Width (W)

 5.00 in127 mm

Note

N/A Refers to basic part number only. When ordering, the number of air inlets and type of connection must be specified.

  • 1 Dynamic torque shown, static torque approximately 25% greater. Torque in each application is dependent upon air pressure and speed.
  • 2 Maximum rpm is dependent upon operating conditions and varies for each application. Consult factory for applications exceeding these speeds.
  • 3 Drum contact with worn shoes.
  • 4 Tolerance for sizes:
    3 thru 5
    +0.000/-0.003 in (+0.00/-0.08 mm)
    6 and larger
    +0.000/-0.005 in (+0.00/-0.13 mm)