The design check for the lift buffers listed in the table has been made according to the hoisting directives 95/16/EG. The permissible load zones are documented for each lift buffer type by the certificate No. An EC design check certificate can be provided for each lift buffer type.
Lifts with lower speed than the maximum nominal speed taken as a basis for the design check, are for the same load zone, when the loads from cabin / working load or counter load are within the values mmax and mmin.
Lifts with lower speed than the maximum nominal speed taken as a basis for the design check, are for the same load zone, when the loads from cabin / working load or counter load are within the values mmax and mmin.
Unit of Measure
Specifications
Maximum Permissible Impact Mass @ 0.4 m/s |
N/A 1661 kg |
Minimum Permissible Impact Mass @ 0.4 m/s |
N/A 103 kg |
Maximum Permissible Impact Mass @ 0.63 m/s |
N/A 1504 kg |
Minimum Permissible Impact Mass @ 0.63 m/s |
N/A 153 kg |
Maximum Permissible Impact Mass @ 1.00m/s |
N/A 1442 kg |
Minimum Permissible Impact Mass @ 1.00m/s |
N/A 253 kg |
Maximum Comp. Length |
N/A 180 mm |
Dimension G |
N/A 1.98 kg |
Dimension d1 |
N/A 125 mm |
Dimension h1 |
N/A 200 mm |
Dimension S |
N/A 8 mm |
| PE1 | N/A 1 pc |
- 1 1)= packing unit = minimum order quantity
