Products Catalog
Expansion Sections are used at all structural expansion joints and for systems longer than 492 ft. (150m) to allow for thermal expansion / contraction of the bar. The maximum gap of the Expansion Section is 2.0" (50 mm). The Expansion Section is 14' 9" (4.5 m) long and is installed in place of one length of conductor bar.
Request Information
Unit of Measure
Items
Al-Expansion-Sections-with-Splice-Installed

Expansion Sections with Splice Installed - Aluminum / Stainless Steel Bar
Al-Expansion-Sections-with-Splice-Installed

Expansion Sections with Splice Installed - Aluminum / Stainless Steel Bar
Al-Expansion-Sections-with-Splice-Installed

Expansion Sections with Splice Installed - Aluminum / Stainless Steel Bar
Al-Expansion-Sections-with-Splice-Installed

Expansion Sections with Splice Installed - Aluminum / Stainless Steel Bar
Al-Expansion-Sections-with-Splice-Installed

Expansion Sections with Splice Installed - Aluminum / Stainless Steel Bar
Amperage Rating N/A 200 A N/A 200 A N/A 200 A N/A 200 A N/A 315 A
Cover Type N/A Standard Phase Cover (Orange) N/A Standard Ground Cover (Green) N/A Medium Heat Cover (Red) N/A UV Stable (Black) N/A Standard Phase Cover (Orange)
Weight N/A 7.3 lb3.3 kg N/A 7.3 lb3.3 kg N/A 7.3 lb3.3 kg N/A 7.3 lb3.3 kg N/A 7.8 lb3.5 kg
Material N/A Aluminum / Stainless Steel