The Rowland Company
The Rowland Company
4900 North 20th St.
Philadelphia, PA 19144
Toll Free: (800) 925-8824
Phone: (215) 455-4900
Fax: (215) 455-8888
Email: rowland@rowland2.com
Print Back
The Airflex quick release valve (QRV) is a pneumatic in-line, three-way valve designed to automatically close upon pressurization and open to exhaust when a pressure drop occurs in the supply line. The valve provides an exhaust port close to the pressurized chamber of the device being controlled rather than exhausting through long supply lines and/or control components. The end result is a reduction in lag time between the signal to exhaust and response.
Unit of Measure

Specifications

Size

 N/A 3/8

Maximum Operating Pressure

 N/A 150 psi10.3 bar

Minimum Sealing Pressure

 N/A 2 psi0.14 bar

Operating Temperature Range

 N/A -40 to 49 ºC-40 to 120 ºF

Mean Life

 N/A Over five million cycles at 75 psi (5.2 bar) and 80 ºF (27 ºC).

Diaphragm Material

 N/A Polyurethane

Housing Material

 N/A Zinc alloy

Inlet Port Thread

 N/A 3/8-18

Tubing Outside Diameter

 N/A 0.500 in

Cylinder Port Thread

 N/A 3/8-18
Flow Capacity (Inlet to Cylinder)1 N/A 121 ft³/min3.4 m³/min
Flow Capacity (Cylinder to Exhaust)2 N/A 206 ft³/min5.8 m³/min

Muffler Part Numbers

 N/A 414915

Dimension D

 N/A 2.10 in53 mm

Dimension D1

 N/A 3.52 in89 mm
Dimension D533 N/A 0.31 in8 mm

Dimension H

 N/A 1.93 in49 mm

Dimension L1

 N/A 1.42 in36 mm

Dimension L2

 N/A 0.56 in14 mm

Dimension M

 N/A 0.95 in24 mm
Dimension O4 N/A 0.500 in12.7 mm
Dimension O15 N/A 3/8-18

Dimension O3

 N/A 0.43 in11 mm

Dimension O4

 N/A 3/4-16

Dimension P

 N/A 1.26 in32 mm
Dimension U16 N/A 1.17 in30 mm
Dimension U27 N/A 2.47 in63 mm
Dimension U58 N/A 2.00 in51 mm

Dimension W2

 N/A 1.36 in35 mm

Manufacturer

 N/A Eaton-Airflex

Quick Release Valve Options

N/A Diaphragm & End Cap Kit - DP Diaphragm, Muffler & End Cap Kit - DQ with Inlet Pipe Thread - DG with Inlet Pipe Thread & Muffler - DT with Metal Sleeve - DE with Metal Sleeve & 1/4 Pipe Adapter - DM with Metal Sleeve & Muffler - DS with Metal Sleeve & Pipe Adapter - DL with Rubber Sleeve - DF with Rubber Sleeve & Muffler - DR

Air Quality

N/A Clean and dry to avoid contamination of housing and diaphragm. Any additive used in air supply must be compatible with valve materials.

  • 1 Flow Capacity (At 100 psi (6.9 bar) inlet pressure with full pressure drop.)
  • 2 Flow Capacity (At 100 psi (6.9 bar) inlet pressure with full pressure drop.)
  • 3 Depth of tube insertion.
  • 4 Outside tube diameter.
  • 5 American Pipe Thread
  • 6 Swing radius.
  • 7 Swing radius.
  • 8 Swing radius.