Products Catalog
Expansion Sections are used at all structural expansion joints and for systems longer than 492 ft. (150 m) to allow for thermal expansion / contraction of the bar. The maximum gap of the Expansion Section is 2.0" (50 mm). The Expansion Section is 14' 9" (4.5 m) long and is installed in place of one length of conductor bar.
1 - 12 of 12 | Results Per Page | View | Unit of Measure
1 

Item #

Amperage Rating

Cover Type

Weight

Material

N/A 160 A N/A Standard Phase Cover (Orange) N/A 7.5 lb3.4 kg N/A Copper
N/A 160 A N/A Standard Ground Cover (Green) N/A 7.5 lb3.4 kg N/A Copper
N/A 160 A N/A Medium Heat Cover (Red) N/A 7.5 lb3.4 kg N/A Copper
N/A 160 A N/A UV Stable (Black) N/A 7.5 lb3.4 kg N/A Copper
N/A 250 A N/A Standard Phase Cover (Orange) N/A 8.9 lb4 kg N/A Copper
N/A 250 A N/A Standard Ground Cover (Green) N/A 8.9 lb4 kg N/A Copper
N/A 250 A N/A Medium Heat Cover (Red) N/A 8.9 lb4 kg N/A Copper
N/A 250 A N/A UV Stable (Black) N/A 8.9 lb4 kg N/A Copper
N/A 400 A N/A Standard Phase Cover (Orange) N/A 10.6 lb4.8 kg N/A Copper
N/A 400 A N/A Standard Ground Cover (Green) N/A 10.6 lb4.8 kg N/A Copper
N/A 400 A N/A Medium Heat Cover (Red) N/A 10.6 lb4.8 kg N/A Copper
N/A 400 A N/A UV Stable (Black) N/A 10.6 lb4.8 kg N/A Copper
1 - 12 of 12 | Results Per Page | View | Unit of Measure
1