Contact us today:800.925.8824 Email
REQUEST FOR QUOTE
Search Catalog
        
 All Categories    WCB2 Disc Brake Elements
All Categories > Clutches and Brakes > Tension Brakes > Airflex® Water Cooled Brakes > WCB2 Disc Brake Elements > Item # 146536  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # 146536, WCB2 Single Piston


WCB elements are disc type, externally cooled units. They are designed to absorb and dissipate the thermal loads associated with the most severe clutch and brake applications. The WCB friction couple was developed specifically for continuous slip service and has a dynamic coefficient of friction that is greater than its static coefficient of friction. Also available, special high coefficient linings, which provide 50% higher torque than standard friction linings and provide a 1:1 dynamic to static torque ratio. Element construction and operation is illustrated. Pressurizing the cylinder causes the piston to clamp the friction disc between the water jackets. Heat generated at the friction interface is quickly transferred to the circulating coolant. Element sizes are indicated by the number of friction discs and the disc diameter in inches. For instance, size 224WCB has two (2) friction discs 24 inches in diameter.



Unit of Measure: Imperial Metric Both

Specifications  · Where Used  · Features  · Note

Specifications

Size
236WCBEP

Dimension D24
1.52 in
39 mm

Dimension D25
2.58 in
65 mm

Dimension D29
0.280 in
7.1 mm

Dimension D46
2.38 in
60 mm

Dimension D43
4.97 in
126 mm

Dimension G1
44.498 in
1130.2 mm

Number of Bolt Holes H3
16

Bolt Hole Size H3
1 3/8-6

Bolt Circle Diameter H32
41.500 in
1054.1 mm

Dimension H10
16.50 in
419 mm

Dimension H133
18.375 in
932.1 mm

Dimension J1
16.50 in
419 mm

Dimension J24
44.86 in
1139 mm

Number H4
6

Size H4
1/2-13 in
1/2-13 mm

Bolt Circle H4
14.500 in
444.5 mm

Single Piston Size
3/4-14

Piston Inlet Bolt Circle Diameter
28.00 in
711 mm

Minimum Bore Size
6.75 in
171 mm

Maximum Bore Size
11.75 in
298 mm

Dimension D
20.75 in
527 mm

Dimension D1
9.000 in
229 mm

Dimension D2
17.24 in
438 mm

Number of Coolant Ports (O)5
8

Coolant Port Thread Size6
1 1/4 SAE ORB

Gear Part Number
416536

Dynamic Torque Rating7
590000 lb-in @ 80 psi
66661 Nm @ 5.5 bar

Thermal Rating8
1560 hp
1163.3 kW

Water Flow9
156 gpm
590.5 dm³/min

Maximum Slip Speed10
475 rpm

Maximum Freewheeling Speed11
700

Housing (Weight)
3250 lb
1474 kg

Disc & Gear (Weight)
388
855

Disc & Gear (Inertia)
28.11
667

Housing (Inertia)
6323 lb·ft²
266.45 kg·m²

Water Volume
1135 in³
18.6 dm³

Manufacturer
Eaton-Airflex

Actuation
Air Applied
1 Tolerance Sizes 8WCB thru 24WCB
+0.000/-0.003 (+0.00/-0.08)
36WCB +0.000/-0.005 (+0.00/-0.13)
48WCB +0.000/-0.005 (+0.00/-0.13)
2 American National Standard for Unified Screw Threads
3 Tolerance +0.003/-0.000 in.(0.08/-0.00 mm)
4 Maximum diameter of "as cast" surfaces
5 American National Pipe Thread
6 American National Pipe Thread
7 Exact torque rating is dependent upon applied pressure. Maximum allowable pressure is 150 psi (10.3 bar).
8 Exact torque rating is dependent upon applied pressure. Maximum allowable pressure is 150 psi (10,3 bar).maximum allowable outlettemperatures are 150ºF (65ºC) for fresh water; 165ºF (74ºC) for 70/30 and 60/40 water glycol mixes; and 170ºF (77ºC) for 50/50 water glycol mixes.
9 To insure proper cooling, inlet port must be at the six o’clock position. Flow rates shown are for fresh water, flow rates for water glycol mixes must increase to achieve the ratings in the Thermal Rating column. Maximum allowable inlet pressure - 65 psi
10 Based upon a continuous slip velocity of 4500 fpm (22.9 mps).
11 Maximum freewheeling velocity is 7500 fpm (38.1 mps).


Where Used
  • Drilling rigs
  • Dynamometer
  • Logging equipment
  • Marine mooring systems
  • Slip clutches
  • Tension brakes
  • Unwind stands


Features
Patented piston design
Single or dual piston provides wider range of applied tension with greater control.

Drop in powerhead package
Standard single piston elements can be retrofitted with a dual piston powerhead to provide increased control.

Split wear spacers
The split wear spacers allow for wear adjustment without disassembly of the brake to minimize downtime and maintenance costs.

Unique friction couple
A specially formulated friction material, interfacing with a copper alloy surface, eliminates the stick-slip characteristic associated with ordinary frictional devices.

Rapid heat dissipation
The copper interface conducts heat rapidly to the circulating coolant.

Open or closed loop coolant systems
The element works equally well with open or closed loop circulating systems. On mobile equipment, the engine’s cooling system can be tapped to provide coolant to the element.

Optional corrosion protection
For marine environment applications, protective coatings are available to minimize corrosion.


Note
Basic part number only. Order gear separately.


 MORE IMAGES 

·  WCB2 Disc Brake Elements Mounting Circles


 DOWNLOADS 

WCB2/WBCD Disc Brake Elements Component Parts
(PDF, 213KB)


Site created by Thomas Web Solutions© 2014, The Rowland Company