Products Catalog
Request Information
Two dual flanged elements can be bolted together to form a dual element having twice the torque capacity of a single element. Dual elements can be furnished in sizes 12CB350 through 45CB525.
Unit of Measure

Specifications

Size

 N/A 24CB500
Torque Rating (75 psi/5.5 bar)1 N/A 150000 lb·in17000 Nm
Maximum Speed2 N/A 1200 rpm

Centrifugal Loss Constant Cs

 N/A 2.07 E-06 bar/rpm2 30 E-06 psi/rpm2

Inertia

 N/A 292 lb·ft²12.26 kg·m²

Weight

 N/A 209 lb95 kg

Friction Area

 N/A 676 in²4360 cm²

New Friction Lining Thickness

 N/A 0.26 in7 mm

Worn Friction Lining Thickness

 N/A 0.06 in2 mm
Air Tube Cavity3 N/A 400 in³6.56 dm³

Minimum Drum Diameter

 N/A 23.87 in606 mm

Dimension D2

 N/A 13.63 in346 mm

Dimension D25

 N/A 0.19 in5 mm
Dimension G4 N/A 31.500 in800.1 mm

Dimension H2

 N/A 30.375 in771.5 mm

Dimension H6

 N/A 24.19 in614 mm

Dimension H7

 N/A 30.38 in772 mm

Number of Mounting Holes

 N/A 16

Bolt Hole Size L

 N/A 0.500 in13 mm

Dimension O3

 N/A 0.38 in10 mm

Air Inlet Thread

 N/A 3/8-18

Angle Q

 N/A 11.250 º

Dimension V

 N/A 0.81 in21 mm

Number of Friction Shoes

 N/A 28

Friction Shoe Width (W)

 N/A 12.00 in305 mm

Note

N/A Refers to basic part number only. When ordering, the number of air inlets and type of connection must be specified.

  • 1 Dynamic torque shown, static torque approximately 25% greater. Torque in each application is dependent upon air pressure and speed.
  • 2 Maximum rpm is dependent upon operating conditions and varies for each application. Consult factory for applications exceeding these speeds.
  • 3 Drum contact with worn shoes.
  • 4 Tolerance for sizes:
    12 thru 24, 28 and 32
    +0.000/-0.005 in (+0.00/-0.13 mm)
    26 and 30
    +0.000/-0.008 in (+0.00/-0.20 mm)
    36 thru 45
    +0.000/-0.010 in (+0.00/-0.25 mm)