Products Catalog
Two dual flanged elements can be bolted together to form a dual element having twice the torque capacity of a single element. Dual elements can be furnished in sizes 12CB350 through 45CB525.
Unit of Measure

Specifications

Size

N/A 28CB525
Torque Rating (75 psi/5.5 bar)1 N/A 212000 lb·in24000 Nm
Maximum Speed2 N/A 1000 rpm

Centrifugal Loss Constant Cs

N/A 2.55 E-06 bar/rpm2 37 E-06 psi/rpm2

Inertia

N/A 517 lb·ft²21.71 kg·m²

Weight

N/A 286 lb130 kg

Friction Area

N/A 860 in²5547 cm²

New Friction Lining Thickness

N/A 0.33 in8 mm

Worn Friction Lining Thickness

N/A 0.06 in2 mm
Air Tube Cavity3 N/A 560 in³9.18 dm³

Minimum Drum Diameter

N/A 27.81 in706 mm

Dimension D2

N/A 14.44 in367 mm

Dimension D25

N/A 0.25 in6 mm
Dimension G4 N/A 36.000 in914.4 mm

Dimension H2

N/A 34.750 in882.7 mm

Dimension H6

N/A 28.19 in716 mm

Dimension H7

N/A 34.50 in876 mm

Number of Mounting Holes

N/A 16

Bolt Hole Size L

N/A 0.625 in16 mm

Dimension O3

N/A 0.50 in13 mm

Air Inlet Thread

N/A 1/2-14

Angle Q

N/A 11.250 º

Dimension V

N/A 0.84 in21 mm

Number of Friction Shoes

N/A 34

Friction Shoe Width (W)

N/A 12.69 in322 mm

Note

N/A Refers to basic part number only. When ordering, the number of air inlets and type of connection must be specified.

  • 1 Dynamic torque shown, static torque approximately 25% greater. Torque in each application is dependent upon air pressure and speed.
  • 2 Maximum rpm is dependent upon operating conditions and varies for each application. Consult factory for applications exceeding these speeds.
  • 3 Drum contact with worn shoes.
  • 4 Tolerance for sizes:
    12 thru 24, 28 and 32
    +0.000/-0.005 in (+0.00/-0.13 mm)
    26 and 30
    +0.000/-0.008 in (+0.00/-0.20 mm)
    36 thru 45
    +0.000/-0.010 in (+0.00/-0.25 mm)