Contact us today:800.925.8824 Email
REQUEST FOR QUOTE
Search Catalog
        
 All Categories    DBB Brakes
All Categories > Clutches and Brakes > Disc Clutches and Brakes > DBB Brakes > Item # 146337  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # 146337, DBB Brakes


Image Model DBB brakes are spring applied, pressure released, disc style brakes. They develop equal torque in either direction of rotation. Their torque and thermal capacities allow them to be used in the most demanding applications.

Brake construction and operation is shown in the figure. Pressurizing the brake compresses the brake springs and withdraws the clamping plates from the brake discs. Standard brakes are furnished with either one or two discs, which are free to move axially.

Model DBB uses a conventional piston design to release the brake discs.

The rotating component of the DBB style brake is a very low inertia friction disc core with riveted on friction discs. The low inertia of the rotating components coupled with the high heat sink capacity of the stationary members allow these units to provide superior performance in high cyclic applications. In applications requiring higher speed operation or where precise balance of the rotating components is required, the DBBS style is offered, which utilizes a solid rotor and stationary friction material. Similar to the DBAS design, the DBBS should only be used for applications where brake engagement is non-cyclic.

Torque ratings listed are for brakes with a standard compliment of springs. The quantity of springs can be varied to customize the torque of the brake to suit a particular application. Consult the factory for brake torque of units with non-standard spring configurations.

Brake sizes are indicated by the number of brake discs and the disc diameter in inches. For instance, size 225DBB has two discs 25 inches in diameter.



Unit of Measure: Imperial Metric Both

Features  · Where Used  · Specifications  · Note

Features
Low inertia friction disc assembly.
Reduces the overall inertia that must be stopped.

Optional split friction discs.
Allows removal of friction discs without disturbing other components of drive system in mid-shaft brake arrangement.

Long wearing, self lubricating PolyPak seals.
Eliminates premature twisting failure and requires no external lubrication.


Where Used
  • Bottling equipment
  • Power Shovels
  • Conveyors
  • Shears
  • Power Presses


Specifications

Model
215DBB

Dimension D
11.16 in
283 mm

Dimension D1
4.38 in
111 mm

Dimension W4
9.23 in
235 mm

Dimension D31
1.47 in
37 mm

Dimension D44
0.38 in
10 mm

Dimension D45
0.38 in
10 mm

Dimension H16
6.00 in
152 mm

Dimension J1
18.375 in
466.7 mm

Dimension J1
14.375 in
365.1 mm

Dimension J2
18.94 in
481 mm

Dimension O2
1/2-14 NPT

Minimum Bore
3.06 in
78 mm

Maximum Bore
4.25 in
108 mm

Dynamic Torque Rating
57000 lb·in
6435 Nm

Disc & Gear (Inertia)
10 lb·ft²
0.42 kg·m²

Disc & Gear (Weight)
64 lb
29 kg

Housing (Weight)
275 lb
125 kg

Minimum Releasing Pressure2
60 psi
4.1 bar

Maximum Speed
2400 rpm

Manufacturer
Eaton-Airflex

Actuation
Spring Applied, Air Release
1 Tolerance +0.000/-0.005 in (+0.00/-0.08 mm)
2 Maximum allowable cylinder pressure is 120 psi (8.3 bar).


Note
Tolerance +0.000/-0.003 in (+0.00/-0.08 mm)
All DBB brakes can be supplied plumbed as shown with a flow control valve having American National Pipe thread ports of 1/2-14 for size 9DBB, 3/4-14 for sizes 15DBB, 20 DBB, 25DBB and 1-11 1/2 for size 38DBB


 MORE IMAGES 

·  DBB - Single/Dual Disc Brakes

·  DBB - Spring Allied and Pressure Released Disc Brakes Drawing

·  DBB - Spring Allied and Pressure Released Disc Brakes Mounting Circles


 DOWNLOADS 

DBB Components
(PDF, 78KB)


Site created by Thomas Web Solutions© 2014, The Rowland Company