Contact us today:800.925.8824 Email
REQUEST FOR QUOTE
Search Catalog
        
 All Categories    DC Clutches and Brakes
All Categories > Clutches and Brakes > Disc Clutches and Brakes > DC Clutches and Brakes > Item # 146226  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # 146226, DC Clutches and Brakes


Image Type DC elements can be used as either pressure actuated clutches or brakes. They are available in single and multiple disc designs.

Pressurizing the cylinder causes the piston to clamp the friction disc assemblies between clamping plates. External springs ensure positive disengagement.

Type DC elements are available in five basic disc sizes with static torque ratings to 2,061,000 lb.in (233.000 N.m). Element sizes are indicated by the number of friction discs and by the disc diameter in inches. For instance, size 225DC has two friction discs 25 inches in diameter.



Unit of Measure: Imperial Metric Both

Features  · Where Used  · Specifications  · Note

Features
Favorable torque to size ratio.
DC type elements are physically smaller than most other type clutches and brakes with the same torque capacity.

Low inertia friction disc assembly.
Reduces the overall inertia that must be started or stopped.

Optional split friction discs.
Allows removal of friction discs without disturbing other components of drive system in mid-shaft element arrangement.

Long wearing, self lubricating PolyPak* seals.
Eliminates premature twisting failure and requires no external lubrication.


Where Used
  • Power Presses
  • Tension Brakes
  • Emergency Stop Brakes on Unwind Stands


Specifications

Dimension D1
4.38 in
111 mm

W4
9.00 in
229 mm

Dimension D46
0.38 in
10 mm

Dimension D31
1.47 in
37 mm

Dimension D44
0.38 in
10 mm

Dimension H16
6.00 in
152 mm

H Number
3

H Size
3/8-16NC-2

Bolt Circle
6.50 in
165 mm

Dimension J1
18.375 in
466.7 mm

Dimension J12
14.375 in
365.1 mm

Dimension J23
18.94 in
481 mm

Dimension O2
1/2-14 NPT

Number of Friction Discs
2

Size
215DC

Dynamic Torque Rating at 75 psi (5.2 bar)
82000 lb·in
9260 Nm

Maximum Speed of Disc
2400 rpm

Maximum Speed of Element
1050 rpm

Housing (Inertia)
65 lb·ft²
2.74 kg·m²

Disc & Gear (Inertia)
10 lb·ft²
0.42 kg·m²

Disc and Gear (Weight)
64 lb
29 kg

Housing (Weight)
190 lb
86 kg

Gear Part Number
415454

Minimum Bore
3.44 in
87 mm

Maximum Bore
3.94 in
100 mm

Manufacturer
Eaton-Airflex

Actuation
Air (DC)
1 Tolerance +0.000/-0.003 in (+0.00/-0.08 mm)
2 Tolerance +0.003/-0.000 in (+0.08/-0.00 mm)
3 Maximum diameter of "as cast" surfaces.


Note
Basic part number only. Gear not included.
Some high torque applications of three and four disc elements require additional support on the cylinder side of the unit. Contact your local Airflex representative for more details.


 MORE IMAGES 

·  Type DC Brake Elements Brake Drawing

·  Type DC Brake Elements Mounting Circles

·  Type DC Brake Elements Single/Double Disc


 DOWNLOADS 

DC Element Components
(PDF, 74KB)


Site created by Thomas Web Solutions© 2014, The Rowland Company